Self-cleaning inline water filter for water filtration in hot and cold water supply systems of industrial use.

Industrial mainline water filter with direct flushing for fine water purification from mechanical impurities.

A high-performance filter with a filtration fineness of 1 micron is designed for liquid filtration up to 20 m3 per hour.

-Our inline water filters include 5 types of cleaning in one:

Ultramarina, antibacterial, memory, antiphrastic and energy cleaning.

filtration of water in systems of the hot and cold water supply of industrial use;

filtration of food products: milk, vegetable oils, juices, water preparation for good manufacturing standards.

Filtration of light oil products: gasoline, aviation kerosene, diesel fuel, technical oils.

Filter for industrial use in water supply systems of apartment buildings, cottages, cottages, orphanages, schools, kindergartens, in production.

The filter element is made of stainless high-alloy steel in the form of a string wound on a frame.

Performance - 20 M³ /hr (20,000 LPH)
Filtration fineness - 1 micron
Maximum working pressure- 16 Bar
Minimum working pressure- 0.5 Bar
Connection size -  2 inch, DN50
Maximum temperature- 160°C
Dimensions (mm) 440x308x165
Approximate Weight 5 kg

The fine mechanical cleaning Serus filter FS-20 consists of a body with an internal thread, a string filter element, a water structure, a drain valve, a bulb, a pressure gauge. The drain valve provides direct flushing of the filter. The filter is easy to maintain and operate and has compact dimensions.

Operating principle
The Serus water filter has two modes of operation: filtration and flushing.

In the filtration mode, water penetrates the filter element inside and leaves the filter cleaned.

All mechanical impurities remain outside the filter element at the bottom of the flask. The rinse mode is switched on / off by opening the drainage valve at the bottom of the flask During washing, the water stream removes all accumulated debris from both the surface of the filter element and the bottom of the filter housing. The operation of the drain valve can be done manually or with an automatic flushing device.

The case and the filter flask are made of stainless steel AISI 304 (medical, food steel)stainless steel generator with a magnetic system of rare earth metals
Filtering string element of fine cleaning from high-alloyed stainless steel
NBR seals

Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter. Maintenance of the filter is done without dismantling. The filter position is only in the vertical position with the drain valve pointing down. Installation in a confined space is possible.

Filter Advantages
-high cleaning efficiency
-simple, direct flushing
-compact size
- maintenance of filter done without dismantling from the piping system.
-Filter and filter cartridge is guaranteed to operate properly for 10 years guaranteed, without buying any additional filter cartridges.

Serus water filter FS-20 is used for domestic and commercial purposes for the continuous supply of filtered cold and hot water at normal pressure in the pipeline. Prevents the penetration of foreign matter: rust particles, hemp fibres, grains of sand, etc. 

Products      Magnetic Structured Water          FS-3 SELF CLEANING INLINE WATER FILTER (3,000 LPH)          SERUSUV-100A UV Ultraviolet disinfectant-sterilizer          Structured water device for 10,000 LPH          SERUSUV-3A UV Ultraviolet disinfectant-sterilizer          Whole House Water Purification System                     Application      Pet Groomers Water Filters Solutions          Marine Labs Water Filters Solutions          Faucet Mount Filter Solutions          Fish farming Water Filters Solutions          Universities & Colleges Water Filters Solutions          Casting Water Filters Solutions