Industrial self-cleaning inline water filter with direct flushing for purification of water from mechanical impurities. The capacity of 200 m3 per hour for boiler houses, apartment buildings, cottage settlements, food production, agriculture, irrigation is the best option for price and performance.
A high-performance filter with a filtration fineness of 1 micron is designed for liquid filtration up to 200 m3 per hour.
-filtration of water in systems of the hot and cold water supply of industrial and individual use;
-filtration of food products: milk, vegetable oils, juices, water preparation for good manufacturing standards.
-filtration of light oil products: gasoline, aviation kerosene, diesel fuel, technical oils.
-purification of water in apartment buildings, cottages and cottage settlements;
-water treatment in swimming pools
-sewage treatment in the industry
-heat power engineering
The filter element is made of stainless high-alloy steel in the form of a string wound on a frame.
Performance - 200 M³/hr (200,000 LPH)
Filtration fineness- 10-15 microns (1,30,50 upon request)
Maximum working pressure- 16 Bar
Minimum working pressure- 0.5 Bar or 4 Bar
Connection size - 5 inch, DN125
Maximum temperature- 195°C
Dimensions (mm) 960x495x350
Approximate Weight 75 kg
The fine mechanical cleaning Serus filter FS-200 consists of a body with an internal thread, a string filter element, a water structurer, a drain valve, a bulb, a pressure gauge. The drain valve provides a direct flushing of the filter. The filter is easy to maintain and operate and has compact dimensions.
The Serus water filter has two modes of operation: filtration and flushing.
In the filtration mode, water penetrates the filter element inside and leaves the filter cleaned.
All mechanical impurities remain outside the filter element at the bottom of the flask .The rinse mode is switched on / off by opening drainage valve at the bottom of the flask During washing, the water stream removes all accumulated debris from both the surface of the filter element and the bottom of the filter housing.The operation of the drain valve can be done manually or with a automatic flushing device.
The case and the filter flask are made of stainless steel AISI 304 (medical, food steel)
stainless steel generator with magnetic system of rare earth metals
Filtering string element of fine cleaning from high-alloyed stainless steel
Installation of the filter is possible on plastic and metal pipes. Installation of the filter is recommended after the shut-off valves behind the water meter. Maintenance of the filter is done without dismantling. The filter position is only in the vertical position with the drain valve pointing down. Installation in a confined space is possible.
-high cleaning efficiency
-simple, direct flushing
- maintenance of filter done without dismantling from pipeing system.
-Filter and filter cartridge is guaranteed to operate properly for 10 years guaranteed, without buying any additional filter cartriges.
Serus water filter FS-200 is used for Industrial and commercial purposes for the continuous supply of filtered cold and hot water at normal pressure in the pipeline. Prevents the penetration of foreign matter: rust particles, hemp fibers, grains of sand, etc.